|
Product Details:
|
| Material: | Tungsten Carbide | Application: | PVC Sheet Cutting Blades |
|---|---|---|---|
| Hardness: | 88.9HRA | TRS: | 3500 |
| Density: | 14.2 | ISO Grade: | K50 |
| OD: | 90mm | ID: | 85mm |
| Thickness: | 11mm | Parallelism: | 0.02 |
| Roughness: | Ra 0.8 | Cutting Angle: | 30 Degree |
| High Light: | 88.9HRA Carbide Slitting Blades,Thickness 11mm PVC sheet slitting blades,PVC Sheet V shape cutting knife |
||
Double Face V Cutting Shapes Carbide Slitting Blades For PVC Sheet
Description:
Outer diameter 90.5mm
Inner diameter 85mm
Thickness 11mm
Double cutting angle 60°
Roughness for cutting edge Ra0.8
Roughness for other Ra 0.8
Hardness HRA 88.9
Application: PVC sheet slitting blades
V shape cutting knife.
Photos:
Recommended grades of slitter blades for metalworking:
|
Grade
|
Density | Strength | Hardness | Application |
| YS2T | 14.5 | ≥2300 | ≥91.5 | Qualified for low-speed rough machining, milling titanium alloy, and refractory alloy, especially for cut-off tool and silk prick. |
| YG6X | 14.9 | ≥1860 | ≥92.0 | Qualified for machining of chilled cast iron, alloy cast iron, refractory steel, and alloy steel. Also Qualified for the machining of common cast iron. |
| YG8 | 14.8 | ≥2400 | ≥89.5 | Wear resistance and bending strength, suitable for disc cutters in the electronics industry. |
| YL10.2 | 14.5 | ≥3400 | ≥91.7 | Fine-grain alloy, good wear resistance. Used for processing hardwood. Veneer board, PCB, PVC, and metals. |
| ISO Code | Grade | Binder | Grain size | Density g/cm3 |
Hardness HRA |
TRS N/mm2 |
Application |
| K10 | YF06 | 6 | fine | 14.9 | 92 | 2000 | Fine-grain size, good wear resistance. Semi-finishing of chilled cast iron, non-ferrous metals, semi-finishing and finishing of hardness steel, alloy steel. |
| K20 | YG8 | 8 | medium | 14.7 | 89.5 | 2500 | High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast iron, non-ferrous metals, and alloys as wee as non-metallic materials at low cutting speed. |
| K30 | YS2T | 10 | fine | 14.5 | 92 | 2350 | Fine grain size, high resistance high bending strength, high resistance to bonding, high thermal strength. Machining of refractory alloys, stainless steel, and high manganese steel, etc. |
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226
