|
Product Details:
|
| Material: | Tungsten Carbide | ISO Grade: | K40 |
|---|---|---|---|
| Application: | USA Std Saw Tips | Length: | 4.4-9.4mm |
| T: | 1.98mm | W: | 2.2-4.4mm |
| Hardness: | HRA 90.9 | TRS: | 3500 |
| Density: | 14.5 | Grain Size: | 0.6 |
| High Light: | Indexable Carbide Wood Cutting Tools,K40 Tungsten Carbide Planer Blades,K40 Carbide Wood Cutting Tools |
||
Tungsten Carbide Woodworking Reversible Knives Carbide Planer Blades Indexable Woodworking Tools
Recommened Grades of carbide woodworking tools:
| ISO Code | Grade | Density g/cm3 |
Hardness HRA | TRS N/mm2 |
Grain size | Appplications | Proposal for welding |
| K01 | YG3X | 14.9-15.1 | 94.5 | 2000 | Ultra fine | For the cutting of the timber such as shaving board, laminated board, density board and compound material. | Recommend to use resistance welding .and the temperature should not be too high |
| K05 | YG6AX | 14.9-15.1 | 93.6 | 2600 | Ultra fine | ||
| K20 | YG6 | 14.85 -15.05 | 91 | 2100 | Midium | For The Cutting of Ordinary Wood | Recommend to use resistance welding .and the temperature should not be too high |
| K30 | YG8 | 14.60-14.85 | 90 | 2400 | Coarse | For the cutting of the ordinary wood,also for the aluminum | |
| K40 | YG8C | 14.5-14.8 | 88.5 | 2400 | Coarse | For the cutting of the recycling wood especially for some iron nails and stones in it | |
| K10 | YG6X | 14.75-14.95 | 92 .0 | 2000 | Fine | For the citing of the wood specially | Recommend to use the high frequeney welding |
| K10 | YG8X | 14.60 -14.85 | 91.5 | 2200 | Fine | For the citing of the wood and aluminum specially |
We are good at special tools according to customer's drawing. So don't hesitate to contact for any shapes of carbide tools.
Unground carbide flat bar blanks for Solid Carbide Strips and carbide blanks for other carbide tools like Saw tips for woodworking, Indexable knives, Blanks for profiling, and rods for woodturning tools are all available.
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226
