Product Details:
|
Material: | Tungsten Carbide | Application: | Carbide Rollers |
---|---|---|---|
ISO Grade: | G30 | Hardness: | HRA 90.7 |
TRS: | 3200 | Density: | 14.2 |
Tolerance: | ISO 2768 M | Grain Size: | 1.2-1.6 |
High Light: | HRA 90.7 G30 Tungsten Carbide Roller,ISO 2768 M Tungsten Carbide Roller,14.2 Density Tungsten Carbide Roller |
Anti Impact Carbide Roller For Rebar Steel Bar Forming Tools G30 Roller Finished Ground
Material G30
Co 15%
WC 85%
Grain size: Medium 1.2-1.6 or coarse grain size as per your requirement.
The grain size could be 5-8μm after sintering according to special conditions.
OD from 50-300mm
Height 10-50mm
All finished ground with a surface roughness Ra 0.8
Run-out tolerance: 0.05mm
Application Carbide rollers for steel bars.
Carbide grades with cobalt or nickel are available.
Our advantages:
CIP Forming can eliminate the internal defects of raw sintered carbide blanks in particular. It can provide uniform density suppression products for the thick carbide strips/plate and special shape carbide products.
The internal stress can be removed through the cryogenic process to improve the microstructure.
The internal stress can be removed through the vibration process to improve the overall performance.
The service can be improved through the heat treatment process.
CIP forming.
CIP Forming can eliminate the internal defects of raw sintered carbide blanks in particular. It can provide uniform density suppression products for the thick carbide strips/plate and special shape carbide products.
Why choose us for carbide wear parts:
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226