Product Details:
|
Material: | Tungsten Carbide | Application: | Carbide Corrugated Circular Slitter Blades |
---|---|---|---|
Hardness: | 90.5HRA | TRS: | 2500 |
Density: | 14.8 | ISO Grade: | K30 |
OD: | 230mm | ID: | 110mm |
Thickness: | 1.1mm | Parallelism: | 0.05 |
Roughness: | Ra 0.8 | Cutting Angle: | 7 Degree |
High Light: | K30 Carbide Slitter Blades,Carbide Slitter Blades 1.1mm,1.1mm Tungsten Carbide Cutting Blade |
Carbide Corrugated Circular Slitter Blades Carbide Carton Knives Tungsten Carbide Cutter
Outer Diameter: 230mm
Inner Diameter: 110mm
Thickness: 1.1mm
Application
The circular corrugated cardboard cutting blade is mainly used on a thin blade slitter for the slitting of cardboard, three-layer honeycomb board, five-layer honeycomb board, seven-layer honeycomb board.
OED has its own pressing and sintering workshops, with advanced technology and excellent processing equipment, not only satisfying customers' demands on various tungsten carbide products but also reducing their purchasing costs.
item | Common size ODxIDxT (mm) | Holes | Available For machine |
1 | Ø230xØ110x1.1 | 6x09 | Fosber |
2 | Ø230xØ135x1.1 | 4 key slots | Fosber |
3 | Ø220xØ115x1 | 3x09 | Agnati |
4 | Ø240xØ32x1.2 | 2x08.5 | BHS |
5 | 0240xØ115x1 | 3x09 | Agnati |
6 | Ø250xØ150x0.8 | Peters | |
7 | Ø257xØ135x1.1 | Fosber | |
8 | Ø260xØ112x1.5 | 6x011 | Oranda |
9 | Ø260xØ140x1.5 | Isowa | |
10 | Ø260xØ168.3x1.2 | 68010.5 | Marquip |
11 | Ø265xØ112x1.2 | 6x011 | Mingwei |
12 | Ø270xØ168,3x1.5 | 8x010.5 | Hseih |
13 | Ø270xØ140x1.3 | 6x011 | Vatanmakeina |
14 | Ø270xØ170x1.3 | 8x010.5 | |
15 | Ø280xØ160x1 | 6x07.5 | Mitsubishi |
16 | Ø280xØ202x1.4 | 6x08 | Mitsubishi |
17 | Ø291xØ203x1.1 | 6x08.5 | Fosber |
18 | Ø300xØ112x1.2 | 6x011 | TCY |
ISO Code | Grade | Binder | Grain size | Density g/cm3 |
Hardness HRA |
TRS N/mm2 |
Application |
K10 | YF06 | 6 | fine | 14.9 | 92 | 2000 | Fine-grain size, good wear resistance. Semi-finishing of chilled cast iron, non-ferrous metals, semi-finishing and finishing of hardness steel, alloy steel. |
K20 | YG8 | 8 | medium | 14.7 | 89.5 | 2500 | High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast iron, non-ferrous metals, and alloys as wee as non-metallic materials at low cutting speed. |
K30 | YS2T | 10 | fine | 14.5 | 92 | 2350 | Fine grain size, high resistance high bending strength, high resistance to bonding, high thermal strength. Machining of refractory alloys, stainless steel and high manganese steel, etc. |
Our advantages:
CIP Forming can eliminate the internal defects of raw sintered carbide blanks in particular. It can provide uniform density suppression products for the thick carbide strips/plate and special shape carbide products.
The internal stress can be removed through the cryogenic process to improve the microstructure.
The internal stress can be removed through the vibration process to improve the overall performance.
The service can be improved through the heat treatment process.
Why choose us for carbide wear parts:
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226