Product Details:
|
Material: | Tungsten Carbide | ISO GRADE: | G20 |
---|---|---|---|
Application: | Carbide Sleeve | Type: | Oil/Gas Wear Parts |
Hardness: | HRA 90.1 | TRS: | 3800 |
Density: | 14.2 | ||
Highlight: | G20 Tungsten Carbide Nozzle,Wear Resistance Wear Bushing In Drilling,Tungsten Carbide Nozzle Bushing |
Carbide Spray Nozzles Oil Gas Wear Bushing Nickel Carbide With High Wear Resistance
Cemented carbide nozzles are mainly used for PDC drill bits and roller cone bits. Under high pressure, vibration, mortar impact and other working conditions, drilling fluid is used to flush, cool and lubricate the tip of the drill bit to clean bottom hole debris. In the process of oil and gas exploration.
Normal cylindrical axle sleeve, cylindrical axle seelve with slot, axle sleeve with convex stage, axle sleeve with slot and convex stage, non-standard axle sleeve etc.
Carbide has high hardness, high wear resistance and corrosion resistance, compared to silicon carbide wear resistance is higher, so widely used in oil fields, mines, exploration and other high temperature and high pressure environment,
Carbide wear parts for oil and gas industry, wellhead assembly, such as multistage choke manifold, multistage blow down processing, products such as small bits, choke bean, core and seat, plates for throttle valve, explosion proof sleeves, orifice plate, lagging, blasting nozzle, half ball, etc.
Cobalt Binder Grades
Grade | Binder (Wt %) |
Density (g/cm3) |
Hardness (HRA) |
TRS (≥N/mm²) |
YG6 | 6 | 14.8 | 90 | 1520 |
YG6X | 6 | 14.9 | 91 | 1450 |
YG6A | 6 | 14.9 | 92 | 1540 |
YG8 | 8 | 14.7 | 89.5 | 1750 |
YG12 | 12 | 14.2 | 88 | 1810 |
YG15 | 15 | 14 | 87 | 2050 |
YG20 | 20 | 13.5 | 85.5 | 2450 |
YG25 | 25 | 12.1 | 84 | 2550 |
Nickel Binder Grades
Grade | Binder (Wt %) |
Density (g/cm3) |
Hardness (HRA) |
TRS (≥N/mm²) |
YN6 | 6 | 14.7 | 89.5 | 1460 |
YN6X | 6 | 14.8 | 90.5 | 1400 |
YN6A | 6 | 14.8 | 91 | 1480 |
YN8 | 8 | 14.6 | 88.5 | 1710 |
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226