|
Product Details:
|
| Material: | Ceramic | ISO Grade: | K10,K20,K30,K40 |
|---|---|---|---|
| Application: | For Machining CrNiFe Material | Diameter: | 14mm |
| Length: | 60 | Cutting Length: | 14mm |
| Flute: | 4F | Color: | White, Grey |
| High Light: | Customized Ceramic End Mills,Fe Material Ceramic End Mills,Cr Heatresitant End Mills |
||
Customized Ceramic End Mills For Machining Cr NI Fe Material Heatresitant End Mills
Material:
Ceramic end mills
Diameter 14mm
Length 60mm
Cutting length 14mm
Application: good for finishing machining
Other Carbide grades:
| Wear part grades | Grade | ISO Grade | Co | Density |
Hardness HRA |
T.R.S. | Grain size |
| OK01UF | K01-K05 | 3.00 | 15.10 | 93.50 | 2000 | Ultra Fine | |
| OK10F | K10-K20 | 6.00 | 14.90 | 92.00 | 2000 | Middle/Fine | |
| OK30 | K30 | 8.00 | 14.80 | 91.50 | 2200 | Fine | |
| OK40F | K40 | 10.00 | 14.45 | 91.90 | 3400 | Middle/Fine | |
| OK50F | K50 | 12.00 | 14.25 | 90.00 | 3500 | Fine | |
| OG10 | G10 | 8.00 | 14.70 | 91.00 | 2100 | Middle | |
| OG20 | G20 | 11.00 | 14.40 | 89.00 | 2400 | Middle | |
| OG30 | G30 | 15.00 | 14.20 | 86.70 | 2800 | Middle | |
| OG40 | G40 | 20.00 | 13.65 | 85.00 | 3000 | Middle | |
| OG50 | G50 | 25.00 | 13.20 | 84.20 | 3200 | Middle |
we specialized in producing Punches, Ejector Pins and sleeves, Die Buttons, Bushes, Ejector Punches, Drill Rods, Ball Cages, Springs,Block Sets of many different standards
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226
