|
Product Details:
|
| Material: | Tungsten Carbide | Application: | Carbide Bushing |
|---|---|---|---|
| ISO Grade: | G20 | Hardness: | HV30 1500 |
| TRS: | 3800 | Density: | 14.45 |
| Tolerance: | ISO 2768 F | ||
| High Light: | OD 22.5mm Carbide Drill Bushings,Carbide Drill Bushings Ra 0.2 |
||
Ra 0.2 Polished Carbide Bushing As Shaft Wear Parts Carbide Mechanical Busher
Dimensions:
OD 22.5mm
ID 14h6mm
Height 40mm
Polished Ra0.2
Our cemented carbide bushings include textile parts, bearing parts, machine parts, shaft parts, etc.
Our products range of customized wear parts:
Why choose us for carbide wear parts:
Recommended carbide grades for wear parts:
| Application Code |
Grade | Chemical Composition | Physical and mechanical properties and mirco structure as stintered |
Application recommended | |||||||
| Co | Tic/ TacNbc |
WC | Density | Hardness | Hardness | TRS | Coercivity | Grain Size | |||
| g/cm3 | HV 30 | HRA | N/mm2 | KA/m | μm | ||||||
| G05 | OG6X | 6 | 94 | 14.85～15.05 | ≥1500 | ≥91.00 | ≥1700 | 19.2～25.7 | 0.8 | For drilling soft or medium hard rock formation with a single-zxis compression strength less than 60 Mpa | |
| G10 | OG6 | 6 | 94 | 14.85～15.05 | ≥1350 | ≥89.50 | ≥1800 | 12.0～15.9 | 1.6 | ||
| G15 | OG8C | 8 | 92 | 14.55～14.75 | ≥1150 | ≥87.50 | ≥2000 | 7.6～9.6 | 2.5 | For drilling soft or medium hard rock formation with a single-zxis compression strength of60-120 Mpa | |
| G20 | OG11C | 12 | 88 | 14.20～14.40 | ≥1050 | ≥86.50 | ≥2400 | 6.0～8.0 | 2.0 | ||
| G30 | OG15 | 15 | 85 | 13.95～14.15 | ≥1050 | ≥86.50 | ≥2220 | 8.0～10.8 | 1.6 | For drilling soft or medium hard rock formation with a single-zxis compression strength of 120-200 Mpa | |
| G40 | OG20 | 20 | 80 | 13.45～13.65 | ≥750 | ≥83.50 | ≥2480 | 7.0～8.9 | 1.0 | ||
| G50 | OG25 | 25 | 75 | 13~13.15 | ≥650 | 82.5 | ≥3500 | 10~13 | 1.6 | For drilling soft or medium hard rock formation with a single-zxis compression strength of 120-200 Mpa | |
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226
