|
Product Details:
|
Material: | Tungsten Carbide | ISO Grade: | G20 |
---|---|---|---|
Application: | Non-Magnetic Mold Bases | Standard: | DIN, GB, ISO, JIS, BA, ANSI |
Hardness: | HV30 1000 | TRS: | 2200 |
Density: | 14 | ||
High Light: | 2200 TRS Tungsten Carbide Mould,G20 Tungsten Carbide Mould,Tungsten Carbide Mold G20 |
Tungsten Carbide Precision Mold Core Precision Mould Parts Battery Mould Parts
As the core part of the new energy production equipment, the finished tungsten carbide mold core is mainly determined by its good physical properties.
The tungsten carbide material itself has good and stable physical properties. Its wear resistance, corrosion resistance, high hardness, and high strength make it very widely used. It is the core working part in some special extreme working environments, and the mechanical resistance of tungsten carbide processing The good performance and long service life of grinding tungsten carbide mold parts are effective ways to improve industrial production efficiency.
Precision mould parts:
Grinding parts with precision less than 0.002
Precise EDM parts with precision less than 0.005
Facilities advantage:
EDM Cutter 15 sets
Grinder 15 sets
Wire-cuting 3 sets
CNC 2 Sets
Milling machine 1 set
Recommended carbide grades:
ISO Grade | Carbide grade | WC% | Co % | Hardness(HRA±0.5) | Density g/cm3 |
TRS N/mm2 |
Recommended Application |
K01 | YG3 | 97 | 3 | 91.5 | 15.2 | 1500 | Suitable for steel wire, non-ferrous metal and alloy wire rod or material |
K01 | YG3X | 97 | 3 | 92.5 | 15.2 | 1450 | High hardness, good wear resistance, low impact and low impact. Suitable for fine steel wire, non-ferrous metal and alloy wire . |
K10 | YG6 | 94 | 6 | 90.5 | 14.95 | 2600 | For rough machining of non-ferrous metals. |
K15 | YG6X | 94 | 6 | 91.5 | 14.85 | 2700 | Suitable for processing of non ferrous, metal finishing and woodworking cutting tooling |
K10 | YG6A | 94 | 6 | 92 | 14.95 | 2450 | For wire drawing die and woodworking cutting tools |
K30 | YG8 | 92 | 8 | 89.5 | 14.7 | 2700 | For wire drawing die,drawing die |
K40 | YG11 | 89 | 11 | 88.5 | 14.45 | 2900 | For wearing parts and mining tools |
G30 | YG15 | 86.5 | 13.5 | 87 | 14.0 | 2280 | Strength is the best, the wear resistance is low, it is suitable for impact rotary rock drill and heavy rock drill, rock hard rock layer. |
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226