|
Product Details:
|
Material: | Tungsten Carbide | ISO Grade: | G20 |
---|---|---|---|
Application: | Non-Magnetic Mold Bases | Standard: | DIN, GB, ISO, JIS, BA, ANSI |
Hardness: | HV30 1000 | TRS: | 2200 |
Density: | 14 | ||
Highlight: | Cemented Tungsten Carbide Wear Parts,DIN Tungsten Carbide Wear Parts,ISO Tungsten Carbide Wear Parts |
Non-Magnetic Cemented Carbide Molds Parts Ni Binder Wear Parts
Conventional tungsten carbide mold products are weakly magnetic, and non-magnetic cemented carbide molds are required under special conditions.
For example, the upper cavity of the magnetic ring rotor used in the AR-8 magnetic ring rotor mold requires a non-magnetic mold.
Non-magnetic cemented carbide refers to cemented carbide materials without magnetism. Compared with non-magnetic carbide , magnetic molds have poor performance, low hardness, and short service life. After a period of use, the inner wall of the mold is severely roughened and deformed, which affects the dimensional accuracy and surface quality of the magnetic material. The use of non-magnetic carbide can effectively improve production efficiency with its excellent performance.
Recommended carbide grades:
ISO Grade | Carbide grade | WC% | Co % | Hardness(HRA±0.5) | Density g/cm3 |
TRS N/mm2 |
Recommended Application |
K01 | YG3 | 97 | 3 | 91.5 | 15.2 | 1500 | Suitable for steel wire, non-ferrous metal and alloy wire rod or material |
K01 | YG3X | 97 | 3 | 92.5 | 15.2 | 1450 | High hardness, good wear resistance, low impact and low impact. Suitable for fine steel wire, non-ferrous metal and alloy wire . |
K10 | YG6 | 94 | 6 | 90.5 | 14.95 | 2600 | For rough machining of non-ferrous metals. |
K15 | YG6X | 94 | 6 | 91.5 | 14.85 | 2700 | Suitable for processing of non ferrous, metal finishing and woodworking cutting tooling |
K10 | YG6A | 94 | 6 | 92 | 14.95 | 2450 | For wire drawing die and woodworking cutting tools |
K30 | YG8 | 92 | 8 | 89.5 | 14.7 | 2700 | For wire drawing die,drawing die |
K40 | YG11 | 89 | 11 | 88.5 | 14.45 | 2900 | For wearing parts and mining tools |
G30 | YG15 | 86.5 | 13.5 | 87 | 14.0 | 2280 | Strength is the best, the wear resistance is low, it is suitable for impact rotary rock drill and heavy rock drill, rock hard rock layer. |
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226