Product Details:
|
Material: | Tungsten Carbide | Type: | Carbide Milling Insert |
---|---|---|---|
ISO Grade: | P/N/M | Item: | APMT1135PDER-K |
L: | 14.5 | S: | 1.5 |
Re: | 0.2 | ||
High Light: | Parting Grooving Carbide Milling Inserts,Iron Steel Square Carbide Inserts,Iron Steel carbide insert end mill |
Parting And Grooving Inserts GPMN1502K Carbide Cutting Tools For Cast Iron Steel
APMT1135PDER-K Parting And Grooving Inserts
Inserts Shape | Type | Dimensions(mm) | Grade for Choice | ||||||||||
ØI.C | T | Φd | Re | T8300 | T8200 | T6200 | T8290 | T8450 | T8300 | T3260 | C5230 | ||
APMT1135PDER-K | 6.2 | 3.5 | 2.8 | 0.8 | ● | ● | ▲ | ● | ● | ● | |||
APMT1604PDER-K | 9.3 | 4.8 | 4.4 | 0.8 | ● | ● | ▲ | ● | ● | ● | |||
Recommend grades for milling inserts
Grade | ISO Application | Description |
T8200 | P15-P30 | The high-roughness substrate is matched with a suitable thickness of AlTiN coating to achieve both wear resistance and toughness. It's suitable for many fields from general machining of stainless steel turning to mill in the conditions of stable working, and the pursuit of high wear-resistant occasions. |
M10-M25 | ||
T8290 | K15-K25 | The toughness substrate with solid solution strengthening technology has excellent bending strength and thermal shock resistance. The highly heat-stable multi-component TiAlN coating provides more effective protection for the cutting edge, and is the preferred grade for milling of steel, stainless steel etc. |
P15-P25 | ||
M15-M25 | ||
T8300 | P15-P30 | Suitable for milling of stainless steel and steel materials under severe working conditions. |
M15-M30 | ||
T8450 | P30-P40 | suitable for interrupting processing and rough machining of steel and stainless steel, and also suitable for low speed and interrupted processing of heat resistant alloys. |
M20-M40 | ||
S20-S30 | ||
T3280 | K15-K30 | The substrate with moderate strength and hardness + nano-coating, suitable for semi-finishing and rough milling of cast iron. |
C5230 | P10-P25 | The grade for cermet milling. It has good toughness and crater wear resistance, and is suitable for finishing and semi-finishing milling of steel, cast iron etc. |
K10-K25 | ||
M10-M25 | ||
T6200 | S15-S30 | The substrate with excellent deformation resistance plus nano-coating, suitable for semi-finishing milling of hard-to-machine materials such as high-temperature alloys. |
T6250 | H10-H15 | High hardness and high strength ultra-fine cemented carbide substrate plus nano-coating, suitable for milling of hardened steel. |
Our advantages:
CIP Forming can eliminate the internal defects of raw sintered carbide blanks in particular. It can provide uniform density suppression products for the thick carbide strips/plate and special shape carbide products.
The internal stress can be removed through the cryogenic process to improve the microstructure.
The internal stress can be removed through the vibration process to improve the overall performance.
The service can be improved through the heat treatment process.
CIP forming.
CIP Forming can eliminate the internal defects of raw sintered carbide blanks in particular. It can provide uniform density suppression products for the thick carbide strips/plate and special shape carbide products.
Why choose us for carbide cutting tools:
Contact Person: Mr. Nat Zhou
Fax: 86-0731-28896226